Testing at Raw Material stage:-

10 Samples are randomly drawn from the raw materials received, for 2
different tests: -

1.      Testing of Tex – Tolerance level for fibreglass with Tex 2400, 1200,
600 is set at ± 8%, and for 300 Tex roving is ± 6%.

2.      Loss On Ignition (LOI) – LOI should always be less then 2%.

Test on Finished Fabrics:-

At least one finished fabric sample is randomly drawn from the production of |each and every machine for the following tests:-

1.      Total fabric GSM – Actual weight, of a finished sample, should be within ± 5% of the intended weight of the fabric.

2.      Layer wise GSM – Actual weight of a layer of a finished sample should be within ± 5% of the intended weight on the fabric.

3.      Stitch Density – Samples of finished goods are checked for density of stitches per Sq. Inch. The density varies according to fabric requirements.

4.      Moisture Content – Every sample drawn is checked for moisture content, and the moisture content should not exceed 0.5%.